Developed by panel builders, for panel builders - the AMTE-400 is an effective safety and time-saving solution for the assembly, wiring, and testing of industrial electronics.

• Ergonomic workstation for the assembly and wiring of industrial electronics. Dual-action tilt/height-adjustable version – significantly increased ergonomics vs single actuator system
• Infinitely adjustable tilt control from 0 - 70°
• Infinitely adjustable height control from 31-⅞" to 45-⅞" (81 - 116.5 cm)
• Max load capacity: 400 kg; 908 lbs
• Maximum surface area (standard supply): 44 x 78" (1117 x 1980 mm). Upgradeable to 80.5 x 84" (2044 x 2100 mm) for larger items (using the 31013-001 Side Extensions and 31013-128 XL Upper Extension)
• Floor space requirement: approximately 63 x 45" (160 x 110 cm)

Scope of supply:

• AMTE-400 Mounting Table
• 4 x Clamping Units for Backplanes (31013-127)
• 2 x Standard Casters
• 2 x Locking Casters
• 120v AC Power Adapter

Links:

• 31014.US
• Manual

• Table Side extensions increase the horizontal surface area from 44" (1117 mm) wide, to a working range of 65.5 - 80.5" wide (1663 - 2044 mm)
• Recommended for use as a pair
• Recommended for large panel work (horizontal assembly)

Part numbers:

• 31013-001

• Panel Stops create a felt surfaced ledge for large enclosures and backplane assembly
• Recommended for use as a pair
• Ratchet straps are required for use while the table is tilted
• Highly recommended for large enclosure work

Part numbers:

• 31013-007

• Modifiable plastic guide for supporting and organizing wires.
  Pre-drilled for wire sizes 20 ga - 10 ga
• Recommended for use with Wire Roll Supports (31013-016)

Part numbers:

• 31003-015

• Structural support for commercial wire rolls - can fit multiple rolls per support, and up to 6 supports per table depending on wire roll sizing
• Eliminates the need for an additional wire cart
• Recommended for use with Wire Guide (31003-015) for a more organized panel building process

Part numbers:

• 31003-016

• Assisted support for sliding backplanes from the table-top and preparing for insertion into the cabinet/enclosure
• Please always take caution when installing a backplane in an enclosure. We recommend installing components after backplane installation whenever possible

Part numbers:

• 31013-009

• Rigid, easy-to-use clamping system for securing backplanes to the surface of the table
• Standard delivery includes 2x 31013-127-L and 2x 31013-127-R

Part numbers:

• 31013-127-L
• 31013-127-R

• Lithium-ion battery to replace AC power supply
• Increases table mobility

Part numbers:

• 31013-002

• Replaces clamping units on lower table extension to create a ledge for backplane assembly
• Recommended to be paired with suspension straps (31013-011) for vertical work

Part numbers:

• 31013-019

• Recommended for all AMTE table operations
• Required for use with Panel Stops (31013-007) and Mounting Plate (31013-019)

Part numbers:

• 31013-011

• Easily supports electrical working tools
• Slots for pliers, strippers, screwdrivers, and more
• Custom options available on-request

Part numbers:

• 31003-014